Dodge Repair: Dodge stratus rear bearing torque, disc brake caliper, installation hub

Question
What is the rear bearing torque for a 2002 Dodge Stratus?

Answer
INSTALLATION - HUB AND BEARING
Install the hub and bearing assembly on the knuckle spindle. Install a NEW retaining nut. Tighten the retaining nut to a torque of 250 N·m (185 ft. lbs.).
Install the hub and bearing dust cap using a soft faced hammer.
Install the brake rotor on the hub and bearing.
Install the disc brake caliper. Refer to Brakes.
Install the rear tire and wheel assembly on vehicle. Tighten all wheel stud nuts in crisscross pattern to one-half the specified torque. Repeat pattern, fully tightening the stud nuts to a torque of 135 N·m (100 ft. lbs.).
Lower the vehicle