Dodge Repair: Dodge Durango rear blower motor, dodge durango, seat removal

Question
Ok Kevin how do I get to the rear blower motor blend door? The blower blows air well just not the right temp.

Answer
REMOVAL
Tumble 2nd row seats to cargo position.
Remove 3rd row seat, if equipped. (Refer to 23 - BODY/SEATS/3RD ROW SEAT - REMOVAL)
Remove C-pillar trim. (Refer to 23 - BODY/INTERIOR/C-PILLAR TRIM - REMOVAL)
Remove D-pillar trim. (Refer to 23 - BODY/INTERIOR/D-PILLAR TRIM - REMOVAL)
Remove liftgate opening scuff pad. (Refer to 23 - BODY/INTERIOR/LIFTGATE SCUFF PLATE - REMOVAL)
Remove screws attaching quarter panel trim to C-pillar and D-pillar.
Route 2nd row seat belt through access slot in quarter panel trim.
Grasp quarter panel trim and pull outward to disengage spring clips.
Separate quarter panel trim from vehicle.