Dodge Repair: 98 Dodge Neon Blower Motor Resistor, blower motor resistor, screw threads

Question
Hi
I had problems with my AC going out. Well it would only work when it was on the high setting. My mechanic told me it could be the resistor and so did everyone down at the auto store. Well i bought one and was about to put it in. They told me that i had to remove the dash in order to get to it. Well i did and i just cant find it. Where is it at and how do i get to it??
Thank you.

Answer
BLOWER MOTOR RESISTOR
CAUTION: Stay clear of the blower motor and resistor block (Hot) Do not operate the blower motor with the resistor block removed.

REMOVAL
Remove windshield wipers.
Remove cowl top screen.
Disconnect the resistor block wiring connector.
Remove two resistor block retaining screws. The screw threads attaching the resistor block are not full length. It is necessary to gently pry out the resistor block while turning the screws counterclockwise enabling the threads to engages.
Remove resistor block from vehicle.
INSTALLATION
For installation, reverse the above procedures.