Dodge Repair: map sensor, lbs torque, manifold installation

Question
QUESTION: Where is the map sensor located on a 2000 durango?

ANSWER: engine size?

---------- FOLLOW-UP ----------

QUESTION: 4.7L V8 engine.

Answer
MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR - 4.7L V - 8 ENGINE
The MAP sensor is located on the front of the intake manifold MAP and ECT Sensor Locations - 4.7L V - 8 Engine An o-ring seals the sensor to the intake manifold

REMOVAL
Disconnect electrical connector at sensor.
Clean area around MAP sensor.
Remove 2 sensor mounting bolts MAP and ECT Sensor Locations - 4.7L V - 8 Engine
Remove MAP sensor from intake manifold.
INSTALLATION
Clean MAP sensor mounting hole at intake manifold.
Check MAP sensor o-ring seal for cuts or tears.
Position sensor into manifold.
Install MAP sensor mounting bolts (screws) Tighten screws to 3 N·m (25 in. lbs.) torque.
Connect electrical connector.