Dodge Repair: How to reaplace rear speakers in a 96 dodge ram ext. cab, crank handle, power mirror

Question
How would i reaplace the rear speakers in my 96, 2500 dodge ram ext. cab " how do i take off the panel back there so i can do so?"

Answer
SPEAKERS
FRONT DOOR
Disconnect and isolate the battery negative cable.
Remove the two screws in the door pull cup and remove the cup Door Pull Cup Remove/Install
If equipped, remove the manual window regulator crank handle with a removal tool Window Regulator Crank Handle Remove - Typical
If equipped, remove the power window and lock switches by reaching through the door pull cup opening and depressing the switch bezel rear retaining tab Switch Bezel Rear Retaining Tab
Pull the rear of the switch bezel up and away from the door trim panel.
Unplug the wiring connectors from the switches Door Switch Connectors
On the driver's side only, if equipped with power mirrors, pull the power mirror switch control knob rearward to remove it from the switch stem Power Mirror Switch Knob Remove/Install
Remove the mirror switch retaining nut from the switch Power Mirror Switch Nut
Using a wide flat-bladed tool such as a trim stick, pry the trim panel away from the door around the perimeter and remove the trim panel
NOTE: To aid in the removal of the trim panel, start at the bottom of the panel.

Remove the screws holding the speaker(s) to the inner door panel Door Mounted Speaker Remove/Install
Disconnect the speaker wiring connector and remove the speaker.
Reverse the removal procedures to install.
REAR CAB SIDE PANEL
Disconnect and isolate the battery negative cable.
Remove the rear cab side panel trim as described in Group 23 - Body Components.
Move the side panel trim far enough to access the speaker mounting screws.
Remove the speaker mounting screws.
Pull the speaker out and unplug the wiring connector.
Reverse the removal procedures to install