Dodge Repair: 1999 Grand Caravan left side sliding door dent, interior door panel, frame molding

Question
I have a dent in the left side sliding door and want to push it out from the inside, so I need to know how to take the interior door panel off. I'd also like to know if there any "gotcha's" related to this.

Thanks,

Answer
SLIDING DOOR TRIM PANEL
REMOVAL
Remove sliding door upper frame molding.
If removing the left sliding door trim panel, remove screw from inside ash receiver bezel.
Remove screws holding trim panel to inner door panel Sliding Door Trim Panel Screws
Disengage push-in fasteners holding trim to door panel around perimeter and upper edge of door Sliding Door Trim Panel
Remove sliding door trim panel from vehicle
INSTALLATION
Place sliding door trim panel in position on vehicle.
Align locating pins on backside of trim panel to mating holes in the inner door panel.
Engage push-in fasteners to hold trim to door panel around perimeter and upper edge of door Sliding Door Trim Panel
Install screws to hold trim panel to inner door panel.
If necessary, install screw from inside ash receiver bezel on left sliding door trim panel.
Install sliding door upper frame molding.