Dodge Repair: My 96 caravan wiper quit, one last time, question thanks

Question
QUESTION: Kelvin,
They do not allow me to add more.  I have to start a new one.  Last time, I check with relay out.  I did not get the ground at pin 85.  I will check it again this weekend.  My kid is sick. We are busy looking after her. So, I could not do it right away.  What would be an easy way out, if the BCM is bad?  You have been a great help.  Thanks again.

ANSWER: make your own ground switch  u will more then likely loose int wipe though

---------- FOLLOW-UP ----------

QUESTION: Thanks again.  Where should I run the ground switch?  Should I do at the relay (on/off), it would be a long line?  Can I do it at the BCM? if I know which wire I will break it since it is already inside, or what is the best way to do it?  Please give me recommendations.  If you can, please send me your address, I would like to treat you with Starbuck coffee to show my appreciation.  Thanks.

Answer
plug into the pin 85 so that it will take the place of the bcm doing it. Then just run the wire to a switch of what ever u want  then the other side to a good ground. If u spice a terminal on the end of a wire and just plug it into the pin 85 this way if u ever come across a bcm or care to ever fix it right  that way u dont haft to repair what u cut and so on.
Thanks for the Starbucks =)