Dodge Repair: Track bar for ram 3500, cotter pin, rail bracket

Question
How do you get the track bar off the front end of a 1999 ram 3500 4x4

Answer
TRACK BAR-FRONT
REMOVAL
Raise and support the vehicle.
Remove the cotter pin and nut from the ball stud end at the frame rail bracket Track Bar
Remove ball stud from bracket with Puller C-4150A Track Bar Puller
Remove the bolt and flag nut from the axle bracket and remove the track bar Track Bar
INSTALLATION
Install the track bar at axle tube bracket. Loosely install the retaining bolt and flag nut.
Pry the axle assembly over to install the track bar at the frame rail bracket.
Install the retaining nut on the stud. Tighten the ball stud nut to 95 N·m (70 ft. lbs.) Install a new cotter pin.
Remove the supports and lower the vehicle.
Tighten the bolt at the axle tube bracket to 176 N·m (130 ft. lbs.)