Dodge Repair: 1998 Dodge Intrepid codes /2.7 engine, dodge dealer, dodge intrepid


Question
Hi Pete and thank you for your assistance.
Here is my question: 1998 Intrepid, 2.7 engine,92,000 mi.
Check engine light is on and I pulled the code from the dash(clicking key off and on).
I get a P 1684, which isn't in my manual, and a P 0432 which reads the "left front Catalytic converter is not up to snuff." (my term.)
Is this positive or could this be the result of a bad 02 sensor? Not real sure how these systems read faults.  will take it into the Dodge dealer and have them scan it if need be, but wanted your advice before hand.
I plan on doing my own repairs as have done mech work for years on my own vehicles and others.
Thanks for your help.
Dennis

Answer
hello dennies
this key entry i my self do not belive in i have sean so many pelople change sensers and it is not the problem . I agree with u bring it to a shop and let them scan it and then u can make the repair u will be money ahead and no guesing pete . Good luck to u and if u need any help with the repair