Ford Repair: 3.0 v6 fuel injected 4x4, vacuum hose, fuel pressure

Question
I am getting gas in the oil. i have good compression in all cylinders. i recently replaced the injectors thinking they were the problem, but no luck. any ideas

Answer
about the only way you will get gas in oil is

sticking open or leaking injector-to much fuel pressure because of a bad pressure regulator-(try pulling vacuum hose off of it while running see if fuel is in vac line or on top of port if it is replace regulator)
or misfiring cylinder because if it don't fire then a shot of gas will go into cylinder most will go out exhaust (could ruin converter) but some will get by rings into cylinder. good luck.