Ford Repair: rear brake line, rubber line, line connections

Question
how do i replace the rear brake line on the drivers side

Answer
chuck
   I don't know what you are working on but if you don't have a good quality line wrench you can ruin lines and really cause an aggravation
if you round off the shoulders on the fitting. basically you put a pan underneath line connections to catch brake fluid-loosen line at wheel and at junction tee (unless you are replacing rubber line that is on some vehicles) get proper length and fittings form to fit and reinstall and bleed system. if you only have a line leaking it wouldn't cost much to have it replaced and bled properly. good luck.