QuestionQUESTION: The key does not turn 88 Bronco over. Vehicle does start if jumped at selonoid. Runs fine after jump. Any help is appreciated, thanks!
ANSWER: Replace the solenoid. It's that simple. If that doesn't help, which it does 99 percent of the time, there may be a fusible link bad located right near the solenoid, It's the solenoid.
---------- FOLLOW-UP ----------
QUESTION: I'm sorry, I should have included that I did replace the solenoid.
AnswerCheck the fusible link that I mentioned before. Test the ignition switch lead going to the solenoid. This will be a 2 man job. You're problem, if it isn't in the fusible link, is either the ignition switch itself, or the rod in the column. Hopefully it is just the switch.
