Ford Repair: 1993 Ford Explorer, clutch master cylinder, clutch fluid

Question
""my husband had the clutch replaced 2 years ago.  this is a 2 door 5 speed transmission.  the other day while on the freeway, he heard a clunk noise and the gear shift went to neutral and he was not able to shift at all, when the tow truck pulled the explorer onto the flat bed, it grind like it was in gear.  we put clutch fluid in today since it was
low, he was able to move the gear shift to each gear however the car does not move, it acts as though the car is in neutral or the clutch is stuck or the pedal is pressed and reving the engine, if I pump the clutch will it fix it or is this a larger problem?


Answer
Hello LeAn, Check for a fluid leak on the clutch slave and clutch master cylinder. Being low may meen a possible leak. If it shifts into gears but does not move it may have a clutch and or pressure plate or internal trans issue. Hope this helps Thanks Tony