Ford Repair: ford 1993 f150 pit man arm seals, man arm, pressure seal

Question
HI,JEFF                                                   I asked you a question about removing pit man arm seals the other day.I got as far as the pressure seal.When I turn the wheel the fluid will not blow the seal out.Any other ideas.thanks

Answer
Hi Grant,
Make sure the snap ring is removed and turn the steering wheel all the way to the right or left stop. Bang it hard a couple of times. The seal should pop out. If not use a punch or screwdriver into the seal and pry it out.

Good luck

Jeff
AllExperts