Ford Repair: 1988 Ford Taurus, ford taurus, ford tfi

Question
Have a no start problem with my 1988 Ford Taurus. No spark is evident to the plugs. A new pick up coil in distributor. A different control module was installed. Another coil was tried. A Ford TFI/EEC-IV ignition analyzer was used and the EEC test bad. Then using an EEC test analyzer, shows that it is good. The engine size is a 3.0. Car turns over ok and is getting fuel.

Thank you

Answer
Hello and thanks for the question...I'll try to help.
 I would check for power at the coil first and then work back from there. Also, remove the dist cap and crank the engine........See if the rotor spins...if not, look at the timing chain.
Hope this helps,
Erik