Honda Repair: 91 Prelude 2.0 si, rusted bolts, prelude 2

Question
I bought some new front rotors today...  when I pulled a wheel to get started, those two little phillips head screw would not move.   Know any tricks?

Answer
if you go to Walmart, in the automotive section they sell a product called "PB Blaster" or "liquid wrench". Both are great for busting loose rusted bolts and screws. if your caliper is still on. you can stick a small  bolt or screw driver in one of the little slots on the side of the rotor. turn it so it pinches the screwdriver to the caliper. then it wont turn while trying to take the rotor screws out. The PB Blaster only costs a few dollars or so and i promise you it will make your life so much easier!! i use it for everything!. hope this helps