Honda Repair: brake bleeding, turkey baster, honda accord

Question
I have a 95 Honda Accord with ABS, and I bled the master cylinder using a turkey baster, bled the module, etc,... Once finished, I pumped the brake pedal & it maintained its firmness, no leaks. I took it for a test drive at a high speed, and when i was braking, the car slowed down but it did not stop. The pedal dropped to the floor. After that, there was no more pressure on the pedal. What could be the problem?

Answer
Bleed...Bleed...Bleed!!! Start at the furthest wheel from the m/cyl (rt rr) and work your way around to the closest (lft frt). Bleed till all air is out of the system (this may take ALOT of pumping and refilling the m/cyl). Problem still exists after that you've bought a faulty m/cyl. I'll bet it just needs more bleeding thou!!!!
Dan