Honda Repair: Front Wheel Bearings, front wheel bearings, honda prelude

Question
I have recently bought a 1980 Honda Prelude and was wondering how you change the front wheel bearings

Answer
To change your front wheel bearings you need to remove the front hub/ knuckle assembly from the car. Once you do that, you need to put the knuckle assy in a press. Use the bearing adaptor and press the inner race out of the bearing, then you can access the clip. Remove the clip, then press the remainder of the bearing out. Once you do this, get a bearing knife and remove the inner race from the hub. Press the new bearing back into the knuckle. (make sure the seal part is facing out) Re-install the knuckle on the car and that is it.
Good luck and thanks for the question.
Gene