Isuzu Repair: 1992 Isuzu pickup, isuzu pickup, heater hose

Question
Heater hose to intake blew and spewed water everywhere. Replaced hose and water pump.  Adjusted timimg correctly, although engine has been rebuilt before.  Now it's not starting. Had water on spark plugs, but now dry. Spark plugs were brand new before this happened.  Distributor is set correctly.  But truck will not start, any ideas.

Answer
Hello Mathew. Well Even though you think that the distributer is completely dry, I would double check it. If water contacted your module or coil while voltage being applied to it, bad things man, sorry but I would go and have your module and coil checked to see if this is the case. try the simple things first ok?