Jeep Repair: blower motor resistor 2006 jeep wrangler, blower motor resistor, jeep wrangler

Question
After removing glove box i am unable to locate the old one. i have the new one but see nothing that remotely resembles it, nor can find a wiring harness that goes to anything similar. do you have a diagram of its location and if so can you please send it to me.

thanks for any help you can give

Answer
Remove the glove box (Refer to 23 - Body/Instrument Panel/GLOVE BOX, Instrument Panel - Removal) .

3. Unlock the blower motor resistor wire harness connector and disconnect the connector from the blower motor resistor Fig. 1 .
4. Reach through the glove box opening and remove the upper screw that secures the blower motor resistor to the HVAC housing.
5. From under the instrument panel, remove the lower screw that secures the blower motor resistor to the HVAC housing and remove the resistor