Jeep Repair: 08 wrangler jk dash removal, jeep wrangler, factory speakers

Question
I am trying to replace the mid and tweeter speakers in my 08 jeep wrangler.  I do not have the infinity setup.  I am just installing tweeter and mid component speakers.  Can you direct me to some documentation on how to remove the factory speakers?

Thanks

 Randy

Answer
TWEETER

 
1. Disconnect the battery negative cable.
2. Remove the mounting fastener.
3. Remove the tweeter (1).
4. Disconnect the electrical connector.




INSTRUMENT PANEL SPEAKER – DRIVER
1. Disconnect the battery negative cable.
2. Remove the instrument panel end cap.
3. Remove the steering column opening cover.
4. Remove the amplifier. Refer to (Refer to 08 - Electrical/8A - Audio and Video/Audio/AMPLIFIER - Removal) .

 
5. Disconnect the electrical connector.
6. Remove the mounting fasteners in the left side of the instrument panel.
7. Remove the speaker mounting fasteners.
8. Remove the speaker (2) by carefully pulling the left side of the instrument panel outward until there is sufficient room to remove the speaker through the end cap area.




INSTRUMENT PANEL SPEAKER – PASSENGER
1. Disconnect the battery negative cable.
2. Remove the glove box.
3. Remove the instrument panel end cap.
4. Disconnect the electrical connectors.
5. Remove the speaker mounting fasteners.
6. Remove the speaker