QuestionQ1)Can the low beam headlamps be changed seperately from the other front lights or is it one complete headlamp assembly unit. If they can how do you access them and is there a brighter aftermarket lamp available?
Q2) Is there a fix for intermittant operation of the I/P Cluster. Mine comes on and off randomly, thus no gages work.
AnswerHEADLAMP
REMOVAL
Remove the screws attaching the bezel to the grille opening panel
Remove the screws attaching the retaining ring to the headlamp bucket.
Disconnect the headlamp bulb wire harness connector Headlamp Connector
Separate the bulb from the vehicle.
Remove the spring attaching the headlamp bucket to the grille opening panel Headlamp
Slide the headlamp bucket downward to disengage it from the headlamp adjusting screws
INSTALLATION
Position the headlamp bucket in the grille opening panel and slide the headlamp bucket upward to engage it with the headlamp adjusting screws.
Install the spring attaching the headlamp bucket to the grille opening panel.
Connect the wire harness connector.
Position the bulb in the bucket.
Position retaining ring on the headlamp bulb and install screws.
Install the headlamp bezel.
as for the cluster replace the cluster.
