Jeep Repair: 98 jeep grand cherokee blower/resistor, jeep grand cherokee, jeep grand cherokee laredo

Question
How do you access and remove the blower motor and resistor on a 98 jeep grand cherokee laredo?  
Please Help!

Answer
BLOWER MOTOR RESISTOR AND POWER MODULE
REMOVAL
Disconnect and isolate the battery negative cable.
Unplug the wire harness connector from the blower motor resistor or power module.
Remove the screws that secure the blower motor resistor or power module to the heater-A/C housing.
Remove the blower motor resistor or power module from the heater-A/C housing Blower Motor Resistor or Power Module Remove/Install
INSTALLATION
Install the blower motor resistor or power module to the heater-A/C housing. Tighten the mounting screws to 2.2 N·m (20 in. lbs.)
Plug in the wire harness connector to the blower motor resistor or power module.
Connect the battery negative cable.