Land Rover Repair: stuck incrawl mode, airspring, vehicle inspection

Question
I took my '95 rover in for annual vehicle inspection.  When they were done, my eas read in crawl mode.  The light is flashing to take it back to normal but it will not go.  I also have a strange clicking sound now inside when I apply the brakes.  When I shut the car off it actually rises slightly in height.  The pump and systems were all replaced less than two years ago.  Any idea what the problem could be?  

Answer
my first thought is they unseated an airspring when they lifted it to look under.  the suspension will try to raise, but all the air will dump out the unseated spring.  when you hit the brakes it will not level so you hear all the solenoids closing, and the remaining air will slightly pressurize the good springs.

use the manual jumper method to raise each spring individually  to see which is pulled apart.  re-seat the bead on the spring and it should be good.

http://www.rover-renovations.com/kb.asp?id=27