Question99 range 4.6hse
if i put it in D it will not go any where. its like as if it was in neutral. in order for it to start moving i have to put in 1st and as soon as its going about 5mph i switch it back to D and its fine from there untill i stop or go at a very low speed " about 5mph or so". it goes back to the bigginig "newtral". i have to start the hole process again.
if in d or 1 or anything and i push the accelator to much it makes a sound like skipping the links "krick, crick,crick. or i am pulling something. its like it does not grab the gears. any sugestions?
i saw a range rover p38 gear box ecu. supposibly is a small chip which tells the transmission to shift and to do what ever it needs to do. maybe this is the problem. what do you think
thank you
luis
please let me know what you think.
junco_luis@yahoo.com or 401-473-6045
AnswerI think you may have two failures. The failure to go when you put the truck in gear is probably a clutch problem inside the transmission.
The clicking is probably the slipping of a worn out chain in the transfer case.
I think you are looking at two different repairs. I've seen that situation before.
