Land Rover Repair: back up ligth...., reverse sensor, turn signal

Question
my vehicle problem is I DON'T HAVE BACK UP LIGTH ON BOTH SIDE REAR LEFT & RIGTH....FUSE & LIGTH BULB ARE TESTED OKEY....IS IT POSSIBLE MY BACK UP SWITCH NEED TO BE REPLACE ?

Answer
Hi Domingo,

I had a similar problem with my Disco, turned out to be the bulb holder inside the rear body panel.  It had corroded and was shorting out.  I also had trouble with the bumper turn signal bulb holder: wires rusted right off the terminals.

Check out the bulbs and the connecting wires before looking at reverse sensor.

Regards,

JohnMc