Mazda Repair: oil change, oil drain plug, mazda 626

Question
How do you change the oil on a 94 Mazda 626 Lx 4 Cylinder

Answer
if you need to ask i recommend you take it to a licenced shop and have them do it. normally it ends up being cheaper now adays anyways.

but if need be remove the oil drain plug on the bottom for the oil pan you need a large oil pan about 2gal or better let the oil drain then remove the oil filter with a wrench don't use a scwer driver to remove it. when installing the oil filter make sure it has a rummer ring and apply clean engine oil to the rubber seal before installing clean the drain plug make sure it has the washer on it and reinstall fill engine with clean oil the amount and type recommed by the manufactor check for leaks let sit for a little while and check the oil level is correct start engine comform no leaks and thats it.