Mazda Repair: clutch, clutch disc, hydraulic failure

Question
I have a 1989 mx5 and the problem I am having is when I engage the clutch, I can put it in gear just fine, but the clutch releases and it goes into gear before I let the pedal out. I have already replaced the clutch disc and pressure plate but that did not fix the problem. I am thinking that it may be a problem in the hydraulic system but am not sure.  please help.

Answer
Clutch hydraulic failure,  replace the master and slave cylinders as an assembly, inspect the line hose for any leaks.  They wear at comparable rates so replace them as a set and use new, either Mazda or Beck Arnley and they will go trouble free for another 30-50k.

service@miatashop.com