Mazda Repair: B2000 overheating engine, propelers, luck chris

Question
I have an 84 B2000 pickup that has an overheating problem.  I recently replaced the thermostat and the problem did not go away.  Where do you suggest I look for next?

Thanks.

Eric

Answer
Hi Eric
Did you flush out the cooling system? there is a possility of a blockage somewhere in the cooling system, feel the bottom rad hose and the top rad hose with the engine running. if one still feels cold then I would check into a block in the radiator, I would check for flow on the water pump because on some of the aftermarket water pumps they come with plastive propelers that where or actualy break and fall off.
If you still have a problem follow me up
Good Luck
Chris P