Mercedes Benz repair: ml320 P0500 & P0720, vehicle speed sensor, car idles


Question
happens only in the morning. The car idles fine, switch to Drive or R speedometer doesn't work, won't switch above 1st gear, huge loss of power (it takes 3.5-4.5k rpm to go 20mph). I let the engine worm up then turn it off, clear both codes (every time they show up at the same time : P0500 and P0720), start it up again and...  there it goes... runs perfect. Runs perfect for a whole day. Next morning the same story, three mornings in a row!
wiring? sencors? something else?

ThanQ for your time.

p.s.any clue on the lengh of the trans fluid dip or lengh of the level range marks?


Answer
vehicle trouble code P0500 - Vehicle Speed Sensor Malfunction = Transmission Limp Mode.

P0720 Output Speed Sensor Circuit Malfunction = Transmission Limp Mode.

The computer is getting no signal or error signal from the speed sensor.

On the dipstick question, please read the following thread,

trans filter change
http://www.mercedesshop.com/shopforum/showthread.php?p=452117#post452117