Mitsubishi Repair: pajero running rough, angle sensors, false signals

Question
hi there i have a 95 swb pajero 3500, when i start it it runs great for 10min then and then it will start to run rough and even stall espicaly at idle i have had it coded and the electrican said the crank and cam angle sensor codes are coming up but they seem to be operating ok any ideas?

Answer
Dwayne,
You should have your cam and crank angle sensors checked.  If the test ok, then have your timing belt checked.  If it's worn and stretched, it may have skipped a tooth on the sprocket.  I'd also have your ECM (car's computer) inspected as well.  It's possible it's detecting false signals from the sensors and shutting down the engine.
Good luck!