Mitsubishi Repair: please help if possible, camshaft position sensor, couple teeth

Question
i have a 98 eclipse, and it wount start. i've changed the plugs,and ignition coil. i've also tested the solonoid, relays, and the fuses. and the wires to them.and the fuel pump comes on.it still will not start. but it turns over.but the oil pressure light came on.what sould i try now??

Answer
Tory,
There are 3 main culprits that can prevent a car from starting.  Poor ignition, poor fuel supply, or poor air supply.  Sometimes lumped in with an ignition problem is a bad timing belt.  If the belt has slipped a couple teeth or if there's a problem with the camshaft position sensor, it can cause a failure to start.  

This list is by no means all the possible causes to your problem.  The best thing would be to have a mechanic inspect it, and check the ignition timing and compression on the engine to see where the problem may be.
Good luck!