Mitsubishi Repair: ts magna 1995 will not fire, crank angle sensor, ts magna

Question
have ts magna in workshop, will crank but not fire. Checked and found to have spark, pulse, correct pressure, timing is correct. Have connected scan tool and found no fault codes to exist. Checked all connections, still wont fire. Replaced fuel pump and fuel filter. Tried new ecu check cool temp sensor any advise on where to go next would be great

Answer
Peter: right from my repair manual with ideas to check... pressure regulator on fuel system, ignition compnents damp or damaged, broken, loose or disconnected wiring in the starting circuit, loose distributor or crank angle sensor is changing ignition timing, broken, loose or disconnected wires at the ignition coil or faulty coil. Hope one of these helps you and God bless: Linda