Mitsubishi Repair: How do I bled the clutch lines in my 98 eclipse?, eclipse spyder, clutch fluid

Question
Hello I have a 98 Eclipse Spyder GST.  I've noticed that my clutch fluid level has went below the reservoir and I'm thinking that I have allowed air into the clutch.  Could you tell me how I can bled my clutch lines?  Thanks for your help.

Answer
Sean: First off you need to go out and buy youself a repair manual on your car. It will help walk you through bleeding a clutch. I can sure write down the shorts of doing this but you need the long side of it. Because if you run into something you can check with your repair manual and know what to do. Have you ever done this? Do you have the tools, the garage and the jack stands to put the car up on? Got a friend, girlfriend or wife to help you with this? No, there is not enough page to write down what you have to do and how to do it. Go out and get that repair manual, I would rather you do this safely for both you and that car.  Most parts stores have them, they cost around $20.00 and are well worth the money. God bless: Linda