Mitsubishi Repair: No fire to 2 and 3, power transistor, eclipse gs

Question
My 93 eclipse gs is currently not getting any fire to cylinders number two and three. The power transistor is good, the coil pack is new, and the computer is new. I am not getting any fire at all in these two not even at the coil. Could you help me?

Answer
Justin,
If your check engine light is on, you should check the codes.  It's possible your cam angle position sensor is off or malfunctioning.  It's also possible your ignition timing is off or your timing belt has slipped.  Check your #2 and #3 fuel injectors.  If the injectors are not firing properly, then that will prevent the computer from sending the signal to coil to fire the plugs.  Check those items if you haven't already.
Good luck!