Mitsubishi Repair: mitsubishi engine skip, mass air flow sensor, mass air flow

Question
I have a 1996 eclipse 2.0 non turbo doh.Car has been sitting up a year,timing belt was broke,replaced belt,idlers,and did compression check.Had 180lbs,on all cylinders.Replaced iac sensor,cleaned mass air flow sensor,checked tps sensor,and checked pcv valve.Motor cranks and runs good but has lope at idle.And seems to run rich at idle.any ideas why it lopes at idle speed?

Answer
Danny: I would have the car coded again to see if you got all the bad sensors. As whatever is controling the fuel/air mix is not doing it right when the car is sitting idling. The computer is what controls this and so I would have that checked again. AutoZone will code your car for free. With the car sitting for a year, it would maybe need some good cleaning. Could be a piece is sticking and just need to be cleaned up some to help that idle. Hope this helps and good luck!