Motorcycle Repair: Dyna S ignition, sportster 1200 custom, dyna ignition

Question
I have a intermittently faulty stock ignition sensor on my 1999 Sportster 1200 custom. I purchased a Dyna-S kit for dual fire ignitions this includes the coil and sensor plate. The problem is that the ignition senson plate only has two wires leading off of it. The OEM sensor has 4. I have found nothing for help in this matter.

Answer
Two of the wires from the orgional go to the ignition modual, which you dont need with the Dyna ignition. The two wires from the new ignition will go to the coil. In your directions one wire should be hot to the ignition. Make sure you dont wire it backwards or the ignition will be damaged
Good luck and happy riding
Mike