Motorcycle Repair: lifter adjustment, adjustable pushrods, hydraulic lifters

Question
QUESTION: I have a 1994 road king 1340 with hydraulic lifters, can you tell me the proper adjustment?

ANSWER: Do you have adjustable pushrods or stock ones?
Mike

---------- FOLLOW-UP ----------

QUESTION: I have screaming eagle heads with screaming eagle adjustable pushrods

Answer
Rotate the motor until the front exhaust is lifter is all the way to the bottom of its stroke. Turn the pushrod to make it longer and keep turning it until its tight then go about 1 1/2 more turns. Now let is sit for about 15 minutes to bled down. Go back to it and if you can turn it between your fingers then you need to tighten it again. Keep doing this until it is not loose. Make sure you let it bleed down each time. Once it doesnt bleed down anymore then turn it back just until its loose and then two more turns. Then go to  the next one and do the same thing
Good luck and happy riding
Mike