Motorcycle Repair: no spark, middle prong, modual

Question
QUESTION: i have a 02 harley duece soft tail carborated. drove it friday night and it was fine, pulled it out sat morning and it would turn over but would not fire. checked spark to the plugs and there was none. pulled out tne ignition mod. and found im getting power readings of 12v on four different prongs on the black plug-in but on the gray plug-in side im getting one power reading of 5v on only one prong (w ignition on of course) is that a good indication that the module is bad? i dont have enough expertise to know if power goes in one side and out the other of the module

ANSWER: What voltage are you showing at the coil with the ignition switch on?
Mike

---------- FOLLOW-UP ----------

QUESTION: i m showing 12v on the middle prong

ANSWER: Sounds like the modual is bad.
Good luck and happy riding
Mike

---------- FOLLOW-UP ----------

QUESTION: already got a new modual, but still no spark. any other suggestions? i really appreciate your time.

Answer
If you have voltage at the coil and you installed a new modual the  other thing it can be is the cam position senser which tells the modual to fire. The other thing it can be is the is the bank angle senser, which would stop the firing. The bank angle senser either works or it doesnt. You cant test it, since you wouldnt have to proper testing equipment for that and its expensive
Mike