Motorcycle Repair: harkey rear lighting, night train, loose connection

Question
QUESTION: I have a 2004 night train my problem is my rear turn signals light but wont work as marker lights and they used too
already checked fuses plugs followed wires under fender to lights they seem to be all intact still in the loom (not smashed or torn) removed tail light have power from main harness on the left side have power to tail light,brake light and front lights work,head,turn,markers,just the rear markers don't work do you think the circuit board that every thing plugs into took a dump? please let me know if you have any Ideas?
Thanks
Greg


ANSWER: First off Greg you say your rear turnsignals light but won't function as marker lights. If the lights light then isn't that your marker lights do you possably mean that they won't blink that they just stay on solid when you push on the turnsignal button on that side?

---------- FOLLOW-UP ----------

QUESTION: I think I mite have confused you the lights blink as turns but wont stay lit as markers like the front one do and they always have been turn/marker hope this clarifies my problem


Answer
Its odd that they both quit at the same time. You're sure its simply not that the bulbs are bad I'm guessing. Must have a place in the wiring where they both connect together into the main harness and at this point theres a problem. Best you can do is try a continuity meter to check for a broken wire or loose connection.