QuestionQUESTION: I have a 1999 Ultra Classic fuel enjected while traveling the oil light comes on, goes out, comes back on etc however the oil pressure guage shows I have good oil pressure. What can I do to fix this problem. is there a module or diode I can check if so where can I find it, can you e mail me a wiring diagram.
ANSWER: If you have good oil pressure, and I would check with a manual pressure gage, then you probably have a bad sending unit for the light.
I dont have anyway to send a wiring diagram. You can find one in a service manual that you can get from a dealer
Good luck and happy riding
Mike
---------- FOLLOW-UP ----------
QUESTION: Is there seperate sending units, like one for the light and one for the guage which seems to be what you advised me.
Please advise and if so where do I find them.
Answerthere is one sending unit for your bike. it is on the right side of the motor. Should be a single wire.
I would make sure you have good power to the light as well, before changing the sending unit. the sending unit acts as the ground for the light.
Good luck and happy riding
Mike