Motorcycle Repair: clutch hub, left hand thread, shovelhead motor

Question
i recently purchased my first harley.and dont know much about them.it is a custom built with a 84 shovelhead motor.has dry clutch setup when i was changing the belt i ended up breaking 2 hub studs got the studs but cant get the center nut off hub 2 change studs.and dont know how they go in. is there any pointers u can give me.is the nut right or left hand thread.how is the easiesty way 2 put roller bearings back in.i am confused dont know nothin bout this just wanna ride while i can where are u located in ohio thanks 4 any help u can give me

Answer
the nut is left handed and you will probably need a impact wrench to remove it. The other problem is you will need a clutch hub puller to remove the clutch hub from the trans shaft. the studs go in from the back of the clutch hub. If you have had roller bearings come out then you will need to change the hub anyway. You cant put the bearings back in.
Good luck and happy riding
Mike