Motorcycle Repair: Front and rear brakes, rear brakes, master cylinder

Question
QUESTION: I recently had my tires changed with no brake repair work done.  After the tires were changed I have no brake pressure.  If I pump my brakes, pressure builds up and they work right then but then goes back to no pressure.  Both lines have been bled with no air escaping and no fluid escaping upon pumping up pressure. Pads replaced, same problem.

ANSWER: What year and model?
Mike

---------- FOLLOW-UP ----------

QUESTION: It is a 2003 Fatboy, Fuel injected.

Answer
When they changed the tires they probably opened the pads in the caliber to make it easier the get the claibers back on. You never said how long you pumped them, but it takes quit a while to get them to pump back up, since the hole in the master cylinder is so small. Keep pumping and bleeding them and they should come back up
Good luck and happy riding
Mike