Motorcycle Repair: 2 questions, friction discs, clutch lever

Question
1st,my 77honda cb 550.clutch has started slipping.55,000 miles.what is the proper procedure to adjust the clutch,on the adjuster on the side of right case?2nd,i have a 67 triump that needs engine rebuild.any recamendations for someone who can do it fair priced,and do a good job?thanks for your time.Audie

Answer
Audie,

with that mileage, I imagine the clutch needs
replacing. Just make sure the clutch lever
is not tight, give the cable some slack,
If it has a locknut and screw on the case,
turn it in until it touches and back out
1/4 turn and tighten the nut.
If it still slips, you will have to replace
at least the friction discs, and inspect
the rest of the clutch assy.




For Triumph rebuilds, try:
http://www.qualitymachine-wa.com/triumph.htm