Motorcycle Repair: clutch adjustment, domed pistons, clutch adjustment

Question
I have a 1995 sportster 883 hugger with a 1200 kit in it. I would like to know how to adjust the clutch. Bottom end is stock top end is worked. 30. over buell heads 3 1/2 wisco domed pistons. As far as i know it is the stock clutch. Thank you for your support.

Answer
Locate the adjuster in the cable. It should be under a rubber boot. loosen the locknut and turn the cable so that you have about 1/8 inch play in the clutch lever. Tighten the locknut and put the rubber boot back on and your set to go
Happy New Year
Mike