QuestionI think they are all just single filament globes coz they only have 1 bit on bottom of all of them.
Regards Simon
-------------------------------------------
The text above is a follow-up to ...
-----Question-----
Hi, ive tested all the globes individually off a battery and they light up. Coudl they still be the problem?
Regards SImon
-------------------------------------------
The text above is a follow-up to ...
-----Question-----
Hi Mitch, i have a Yamaha 1991 FZR250 which the indicators have stopped working. I've done the obvious, checked fuses, globes, relay, wiring. Only thing i can think of is the box next to the relay is that the control for indicators? When i turn indicators on the relay clicks once, so the switch is working. ANy suggestions?
Thanks Simon
-----Answer-----
chk the bulbs they have 2 fillaments if one is burnt the indicators will not work .o.k let me know if you need more help i will get you going o.k im here for you hang in there its minor.
mitch
-----Answer-----
yes they could also look at the bottom of the bulb make sure you have to round contacts not jus one also take a hot wire from the battery and run it to the indicator wire if they come on you have a broken or shorted out wire ok let me know im up late here louisiana ok
mitch
Answerin order for them to be indicators and blinkers they must have towo fillaments in the bulb and under the bulb with single filaments when you turn on blinkers the bulb will go off . if you had double fillaments when you turn on yur signal the bulb stays on and the escond fillament blinks it shouldnt go off att all.ok let me know switch to a dual element ok.i think thats the prob lem also check voltage inside the plug make sure you have fire in the connection ok
mitch
