Motorcycle Repair: TC88 FXDWG Wont Run, bank angle, screaming eagle

Question
No it was running fine. i did the cams about3 years ago. Just started getting a little hard to start . i parked it one night and it hasnt run since.
-------------------------------------------
The text above is a follow-up to ...

-----Question-----
Sounds like timing, replaced cam position sensor, coil, tried another module. Turns over fine but backfires thru carb and exhaust, cams look fine, TC88, S&S gear drive cams, Crane tc Ign, Crane Coil ,V&H 2 inti 1 ,Screaming Eagle A/Cleaner assy
-----Answer-----
Has it dont this ever since you replaced the cams?
Mike

Answer
First thing you want to do is check to see if your getting spark. Remove the plugs and holding a plug to the head turn the bike over. Do this with each plug.If not then check to make sure you have power going to the coil and that the plug wires are good. If you dont have power, then check the bank angle senser. there is no test for it, just have to use one that you know is good.
Good luck and happy riding
Mike