Motorcycle Repair: exhaust, honda vtx 1300, hard krome exhaust

Question
The hypercharger kit icludes a jet kit for the carb.  So that should take care of the lean problem, right?-------------------------------------------
The text above is a follow-up to ...

-----Question-----
I have a 2005 Honda VTX 1300.  I am going to install a set of Hard Krome exhaust.  I wanted to know if there is a specific torque value for the bolts that hold the exhaust to the cylinders?
Thanks.

Jason
-----Answer-----
Nope, but u may have 2 purchase a power commander or if it's carbed u may have 2 jet it!

Jason, a hypercharger will only add 2 a lean condition u r almost definatly going 2 experience with your new exhaust, as it even allows for more air to enter the the engine.  The exhaust will make 4 less back pressure and both of these combined will lean your bike 2 the point of ruining your new pipes! Is this bike carbed or injected?  Let me know b4 u go much further!

Answer
It should come with a couple different jets as it will still need a bit larger main jet with the exhaust.  I totally forgot hyperchargers come with a jet kit! lol Give her a whirl and see what happens.  However, if u get on the bike with your new parts and it hesitates, spits or pops u r gonna have 2 have a bigger main.  Good luck!