Motorcycle Repair: Honda CB350 K4, needle nose pliers, honda cb350

Question
Thanks for all your help so far.

I have a wiring harness that needs to be connected onto the my cb350 1972. How can I do it properly? I check out the diagram on the manual but not quite sure I understand it. Any help would be greatly appreciated. Thanks

Answer
Carson, the wires on Hondas are pretty standard in colors and you should be able to just match the colors of the harness with the appropriate wire colors of the attaching wire connectors. Use a set of small needle nose pliers to get the connectors apart, so you don't pull the wire out of the connector end.

If you are installing a main harness, you will have to start down near the battery and then connect as you go forwards and backwards to the ends of the bike.

Bill Silver