Motorcycle Repair: Removing engine/drive shaft, haynes manual, electrex usa

Question
I own a 86 Aspencade.  I have problems with the stator - I pretty well have everything removed - from seat to all lower fearing, carbs, motor mounts bike stands etc.. etc.. but can't get the motor out of drive shaft what am I missing ? -- I got the haynes manual and there is nothing remaining to remove (as per manual) but the engine is not coming out of drive shaft.  I've being trying for couple days now and getting really frustrated.  Please ! I need to take a break with calming liquid in a bottle...  yeap just crack one open now... tks for answer if you can.    Mickey

Answer
Hi Mickey,

Did you remove the C-clip from the shaft at the engine?

Look under the rubber boot that protects the shaft where it enters the engine. Pull the shaft aft a bit to bring the clip into sight if necessary.

It helps to use a floor jack to raise and lower the engine a bit while maneuvering engine a million times so it will exit the frame.

See parts microfiche at "www.bikebandit.com"

I recommend quality replacement parts from Electrex USA "www.electrexusa.com" The best stuff, but expensive.

respectfully,
Mark Shively